Success Stories
Find detailed information about our recent projects realized with customers around Asia.
You can search the list by "industry", "application" or "suction media" to find a success story similar to your project.
Ruwac DLS 1221 removes fine dust and aluminum chips inside our automotive part product
German Automotive Parts Maker, China 2017
Industries
Automotive Parts
Aerospace Industry
Electronics
Engineering
Machinery
Metal Working
Original Equipment Manufacturer
Steel
Automotive Parts
Aerospace Industry
Electronics
Engineering
Machinery
Metal Working
Original Equipment Manufacturer
Steel
Application Category
Vacuum cleaning of floors and surfaces
Vacuum cleaning of floors and surfaces
Suction Media
Aluminium dust
Carbon fine dust
Copper Dust
Metal chips with coolant ( non reactive metals )
Metal chips with oil. Non reactive metals
Polymer powders
Aluminium dust
Carbon fine dust
Copper Dust
Metal chips with coolant ( non reactive metals )
Metal chips with oil. Non reactive metals
Polymer powders
Reason
Very small and partially oily metal particles remain inside the production part after previous production steps.
Product Group
Mobile Vacuums
Mobile Vacuums
Sparks
no
no
Reaching inside the production part with 20 mm cleaning nozzle.
The smaller the cleaning nozzle diameter the more mbar performance is required. Existing small vacuums could hat much too low mbar and airvolume to be able to vacuum small dust away.
The RUWAC compressed air drive vacuum produces up to 300 mbar vacuum and can tolerate unlimited start/stops per hour as was required by the customer. RUWAC produced a special cleaning nozzle to fit exactly for this application.
Fully customized RUWAC vacuum solution. High vacuum power.
1. Reducing rejects due to dust residues to fully acceptable level
2. Extremely high vacuum power for small suction nozzle and sticky fine dust
3. Large long lasting filter