Success Stories

To Vacuum clean working area around Pelletizer building which is 4 levels 20m high at different working areas to ensure safe collection of dangerous material and protect the workers and enforce good housekeeping.

1. Production loss time due to manual or use of ineffective vacuum system which breaks down regularly after working at pelletizer building
2. Cleaning area is big and difficult as it is 4 levels 20m high
3. Additional manpower are spend to manually sweep the dust on the floor
4. Dangerous materials are being sweep clean which pose as an explosion hazard.
5. Cleaning currently can take as long as 1-2 hours after each shift.
6. Cleaning needs at least 4 workers to clean the floor on each levels.
7. Material vacuumed have to be safely collected in a Big bag for easy disposal
8. Material have to be safely stored as material has explosive risk
9. Old Vacuum machines which customers have currently needs to frequently replace filters which is costly and leads to loss production time.

1. DS2720 3 Phase ATEX Zone 1+2+21 II 2 D/G
2. D2 Silo Stand frame for big bag collection of the vacuum material
3. Additional Grounding for Silo and Big Bag
4. Throttle valve with pneumatic rotary actuator for collection of material in big bag
5. JACOB Powder coated steel piping
6. Remote Start / Stop control box at each suction points
7. Alarm for filter cleaning after each operation

1. 2 x DS 2720 drive unit 7.5kw - Zone 1+2+21 II 2D/G
2. Silo pre-separator system with filter 4.5m2
3. Customized silo stand frame for big bag
4. Accessories DN50mm with accessories holder
5. Jacob piping system DN100mm made of Powder coated steel
6. 6 Suction points operated only a maximum of 2 suction points at a time!
7. Manual shaking extension device for handshaking filter cleaning
8. Endcap on each floor
9. Control cabinet with digital text display shows status and malfunction
10. Remote start/stop by selector switch on each suction point
11. Continuous discharge with 2 x pneumatic valves open / close sequence adjustable timing.
12. Automatic piping cleaning valve function after stop operation.
13. Turbine temperature switch 112 C
14. Alarm timer to inform the operator to manually carry out filter shaking process - Filter differential pressure monitoring max 80mbar
15. Max vacuum pressure monitoring function

1. Workers are now better protected from exposure to harmful dust in working area.
2. Cleaning is efficient and safe and dust clouds are no longer formed by sweeping.
3. Cleaning time is greatly reduced with the easy use of accessories and hose at different suction points around the Palletizer building.
4. Easy access to a Vacuum solution to clean any spillage or dust on the floor.
5. Safety concerns such slip and falls are reduced due to cleaner floors.
6. Dangerous material is safely stored for easy disposal when full.
7. Workers no longer need to frequently touch or change filters.
8. Workers spend approximately 30 mins after each shift to clean work area compared to previous 2 hours, saving 75% of the time spend
9. Only 2 Workers required for cleaning, saving 50% of manpower.
10. Production time has been greatly improved.