our Knowledge base

Knowledge Baseデータ内には、お客様のご質問に回答するための適切で有効な情報と技術的定義が一緒に示されています。このデータベースは御客様のご希望とご質問に基づき継続的にアップデートされています。
もしお客様の疑問に対しここで回答が得られない場合はKnowledge Baseのテーマをお書きになり弊社までメールをくだされば、48時間以内に回答いたします。　

お問い合わせフォーム

Supply Voltage and Frequency

Electrical Requirement Considerations.

Supply Voltage and Frequency

Voltage is defined in basic electric principles (Physics: Mr. Voltaire)
as the potential difference that pushes a current in Amperes through
a Resistance in Ohms. This Voltage can be a steady value or a repetitive 
waveform (square wave, sinewave, triangular etc)

  • Unit of the voltage is Volt (V). 

Frequency is the number of cycles that a voltage waveform
repeats itself per seconds.

  • Unit of the Frequency is Hertz (Hz).

DC voltage is a voltage with 0 frequency in effect is steady at a  certain value.

AC voltage is the process in one cycle a voltage will change from 0  volts to a maximum positive value then back to 0 and over to the  same maximum but negatively then back to 0.

  • For example: 230V AC 50 Hz, means that the voltage waveform does the above cycle fifty time per second and swings between positive 230Volts and negative 230Volts.

The effective from incorrect voltage.

  • If motors are operated with a different voltage than specified, it can damage the motor and connected devices.

The effective from same voltage but incorrect frequency:

  • Case 1: You have 60Hz power for a 50Hz motor, the motor will run 20% faster and the motor output power will increase, a 10kW 50 Hz motor will be a 12kW motor on 60 Hz power supply then the motor current and winding  temperature will also increase, it will be overload.
  • Case 2: You have 50Hz power for a 60Hz motor, the motor will run 20% slower on 50Hz power supply This also results in 20% less power machine performance will also decrease.

Click Image to enlarge

 

 



BackPrint